STP for borewell generation point (raw water storage tank) PROCEDURE 1. Description : Take the sample and observe the colour and clarity visually Open the bottle and smell the odour. Take few ml of sample from the bottle and taste. Record the observations in the test protocol. 2. pH : Take 100 ml of … Read more
sop for preparation and standardization of 0.1M Zinc Sulphate 1. Preparation: Dissolve 29 g of Zinc Sulphate in sufficient water to produce 1000 ml. 2. Standardization: Take 20.0 ml solution into a 500 ml conical flask, add 5 ml of 2 M acetic acid and dilute to 200 ml with water. Add about 50 … Read more
Operation &calibration of analytical balance (dhona) 1.0 OBJECTIVE To lay down procedure for cleaning, calibration and operation of Analytical balance. 2.0 SCOPE This SOP is applicable cleaning, calibration and operation of Analytical balance. 3.0 RESPONSIBILITY Execution – Officer QC Checking – Assistant Manager QC 4.0 ACCOUNTABILITY Manager Quality Control 5.0 PROCEDURE 5.1 Operation 5.1.1 … Read more
Operation and Calibration Procedure for Disintegration Test apparatus 1.0 OBJECTIVE -To lay down the procedure for operation and calibration of disintegration test Apparatus. 2.0 SCOPE -This SOP is applicable for operation and calibration of disintegration test apparatus 3.0 RESPONSIBILITY – Execution – officer QC Checking – Assistant Manager 4.0 ACCOUNTABILITY – Manager … Read more
sop for preparation and standardization of 1 M Hydrochloric Acid 1. Preparation: Transfer accurately measured 85ml of hydrochloric acid in a 1000ml volumetric flask. Dilute in sufficient purified water and make up to the mark with purified water. OR As per requirement (consumption history) prepare suitable amount of volumetric solution accordingly. 2. Standardization: … Read more
Preparation and standardization of 0.1 M ceric ammonium sulphate solution 1. Preparation: Weigh accurately about 65g of ceric ammonium sulphate and dissolve, with the aid of gentle heat, in a mixture of 30ml of sulphuric acid and 500ml of purified water. Cool, filter the solution, if turbid, and dilute to 1000ml with the … Read more
sop for preparation and standardization of 0.05 m iodine solution 1. Preparation: Weigh accurately about 14g of iodine and dissolve in a solution of 36g of potassium iodide in 100ml of purified water, add three drops of hydrochloric acid and dilute with purified water to 1000ml. OR As per requirement (consumption history) prepare … Read more
validation protocol for volumetric solution 0.1M ammonium Thiocyanate 1. Approval: This document is prepared by the validation and the GMP compliance team Under the authority of Quality Control Manager. Hence this document before being effective shall be approved by QA team. 2. Purpose: To establish documented evidence, on how the quality of a … Read more
handling of reference standard and preparation of working standard 1.0 OBJECTIVE 1.1 To describe a procedure for handling of reference standard and Preparation of Working standard. 2.0 SCOPE 2.1 This procedure applies for handling of reference standard and Preparation of Working standard to the Quality Control Department 3.0 RESPONSIBILITY 3.1 Officer /Executive … Read more
sop for water sampling and analysis 1.0 OBJECTIVE 1.1 To describe a procedure for water sampling and analysis. 2.0 SCOPE 2.1 This procedure is applicable to the Quality control department 3.0 RESPONSIBILITY 3.1 Officer/Executive – QC 4.0 ACCOUNTABILITY 4.1 Head – QC 5.0 PROCEDURE 5.1 Following type of water are to be collected … Read more