sop for trend analysis of finished products 1.0. OBJECTIVE: The objective of this SOP is: 1.1 To describe a procedure for Trend Analysis of finished products. 2.0. RESPONSIBILITY: 2.1 Head of the Quality Control shall be: 2.1.1. Responsible for preparing the trend analysis of finished products by considering the Analytical parameters. 2.2 … Read more
sop for Chromatographic practices and system suitability 1.0. OBJECTIVE: To lay down a procedure for Chromatographic practices and system suitability. 2.0. SCOPE: This SOP is applicable for procedure of Chromatographic practices and system suitability in quality control department 3.0. RESPONSIBILITY: Executive /Officer QC 4.0 ACCOUNTABILITY: Head- Quality Control 5.0 DEFINITION: Chromatography is a … Read more
SOP For Good Laboratory Practices 1.0. OBJECTIVE 1.1 To lay down a procedure for Good Laboratory Practices in Quality Control Laboratory. 2.0. SCOPE 2.1 This procedure is applicable Good Laboratory Practices in Quality Control Laboratory 3.0. RESPONSIBILITY 3.1 QC Officer or QC Executive 4.0. ACCOUNTABILITY 4.1 QC Manager 5.0. DEFINITION: Good Laboratory Practices … Read more
sop for cleaning and operation of sieve shaker 1.0 OBJECTIVE 1.1 To lay down a procedure for Cleaning and Operation of Sieve Shaker. 2.0 SCOPE 2.1 This procedure is applicable Cleaning and Operation of Sieve Shaker in Quality Control Department 3.0 RESPONSIBILITY 3.1 Officer / Executive to follow up the procedure for Cleaning … Read more
general specification of packing material cartons PROCESS OF TEST 1. DESCRIPTION: Limited / Non-Limited / Glossy / partly gloss / plain carton / having capacity to hold —–tab/ cap and with Colour per specimen Note in the report sheet. 2. DIMENSIONS: this test includes with: (a) LENGTH: Measure the length in ‘mm’ of 10 … Read more
general specification of packing material cap PROCESS OF TEST 1. DESCRIPTION colored circular caps having threading to fit perfectly on the jars and may have company loge embossed on the outer side 2. DIMENSIONS: this test includes with (a) LENGTH: this test is not applicable for caps. (b) BREADTH: this test is not … Read more
sop for Password for Analytical Instrument and LIMS software 1.0. OBJECTIVE 1.1 To lay down a procedure for the usage of passwords to ensure protection of the raw analytical data generated by HPLC , other instrument software’s and LIMS (laboratory information management system) software in Quality Control department during working. 2.0. SCOPE 2.1 This … Read more
sop for Rounding off numerical analytical results 1.0 OBJECTIVE 1.1 To lay down a procedure for Rounding Off Numerical Analytical results to be followed in the Quality Control Department. 2.0 SCOPE : 2.1 This procedure is applicable to all the numeral results observed or calculated from experimental measurements in the Quality Control Department … Read more
sop for sampling of bulk and finished product 1.0 OBJECTIVE 1.1 To describe a procedure for sampling of bulk and finished product. 2.0 SCOPE 2.1 This procedure is applicable to sampling procedure for bulk and finished product by Quality Assurance 3.0 RESPONSIBILITY 3.1 TRS shall raise by production Officer/Executive. 3.2 Sampling shall performed … Read more
sop for cleaning of spillage material 1.0 OBJECTIVE 1.1 To describe a procedure for cleaning of spillage materials in microbiology laboratory. 2.0 SCOPE 2.1 This procedure is applicable cleaning of spillage materials like Inoculum, Media plate, Media tube, media conical in Microbiology Laboratory 3.0 RESPONSIBILITY 3.1 Microbiologist. 4.0 ACCOUNTABILITY 4.1 QC Manager 5.0 … Read more