Destruction of sample after testing
1.0 OBJECTIVE
1.1 To lay down a Procedure for Destruction of sample after testing in Quality Control Department.
2.0 SCOPE
2.1 This procedure is applicable for Destruction of sample after testing
3.0 RESPONSIBILITY
3.1 QC Officer or QC Executive
4.0 ACCOUNTABILITY
4.1 QC Manager
5.0 PROCEDURE
5.1 After approval of the batch Technical Assistant collect all the excess samples in a specified place labelled as
“Sample for destruction”
5.2 In case of ampoules, vials and bottles, break open the glass ampoule open the vials and bottles, empty the
contents in water and discard it. Discard the broken ampoule and vial into dustbin for broken glass wares.
5.3 At the end of day all these excess samples i.e. ointment, liquid, injection and raw materials should be send to ETP.
5.4 After the product softness decant the water and transfer the paste into polyethylene bag.
5.5 Record the destruction detail in log register made for receipt of sample.
6.0 ABBREVIATIONS
| Abbreviation | Extended Form |
| QC | Quality Control |
| SOP | Standard Operating Procedure |
| mg | milli gram |
| gm | gram |