sop for cleaning of autoloader

CLEANING OF AUTOLOADER

CAUTION-Switch off the electrical mains of the machine

CLEANING OF AUTOLOADER CAUTION-Switch off the electrical mains of the machine

A. PROCEDURE FOR PRODUCT TO PRODUCT CHANGEOVER
1. Dedusting external surfaces
Use clean nylon brush and wipe with clean dry lint free duster.
2 Dismantling
(a) back and front cover Remove
(b) empty capsule hopper
(c) magazine followed by pusher plate and raceway
3. Cleaning of parts
Clean the parts by washing prepare 0.1% teepol solution and scrubbing by nylon brush.

Rinse withPurified water follwed by rinsing with 5 micron filtered water. Clean loading platform

with wet and clean duster. Clean empty capsule hopper using clean with dry lint free duster.
4. Drying
The cleaned parts as mentioned in step 3 are wiped and dried using clean dry lint free duster.
5 Assembling
Reassemble all the parts of the machine carefully checking the correctness of assembling.
NOTE
1. Fix the ‘cleaned’ label.
2. If the cleaned loader is not used within 24 hours after cleaning or there are signs of dust on

powder settled on loader, then wipe the body by using a freshly laundered lint free duster.

B. PROCEDURE FOR BATCH TO BATCH CHANGEOVER

1. Empty out the hopper.

2 Remove back and front cover.

3. Remove empty capsules from loading platform by brush

4. Dry-clean the loader with clean dry lint free duster.