Safety Precaution in Quality Control Department
1.1 To lay down a procedure for Safety Precaution in Quality Control Department.
2.1 This procedure is applicable for Safety Precaution
3.1 QC Officer or QC Executive
4.1 QC Manager
5.1 Following guidelines to be followed by working in the Quality Control Lab in a safe manner.
5.2 Put on the aprons while working in the chemical lab.
5.3 While working on instruments follow the operating instruction as per standard operating procedure for the instruments.
5.4 While working with acids/solvents/toxic/hazards material always use the gloves, and safety glasses and breathing masks.
5.5 Ensure that all the electric connections are properly closed and there is no open or loose connection.
5.6 All the instruments are properly earthed.
5.7 Do not use any broken glassware.
5.8 Spillage of solvent/chemicals/acids on the floor should be cleaned immediately.
5.9 Safety shower is to be provided in quality control laboratory.
5.2 Working in Microbiology Laboratory
5.2.1 Put on the required dress as per SOP during working in the microbiology lab.
5.2.2 Cultures are to be handled very carefully and all the equipment comes in contact should be properly cleaned and sterilized.
5.2.3 Microbial waste should be disposed off after proper disinfection as per SOP for Disposal of microbial waste.
5.2.4 In case of spillage of culture, the affected area should be cleaned with disinfectant.
5.2.5 Pressure vessels like autoclave etc. should be used with due precaution and should be inspected for any pressure leakage after fixed intervals.
5.3 Safety and Precaution
5.3.1 Always use hand gloves, facemask and other required safety measures.
|SOP||Standard Operating Procedure|