sop on operation and cleaning of coating pan
1.0 Objective: To describe the procedure for operation and cleaning of coating pan.
2.0 Scope: This procedure is applicable to coating pan
3.0 Responsibility: Operator / Production Officer / Executive
4.0 Accountability: Department Head shall be accountable for the compliance of the system.
5.0 Procedure:
5.1 Operation:
5.1.1 Check the cleanliness of the machine as well as the area. There should not be any remainants of the previous product.
5.1.2 Switch “ON” power supply.
5.1.3 Load the tablets in to the pan as specified in batch manufacturing record.
5.1.4 Set the coating parameters such as inlet temperature, outlet temperature, pan speed, air pressure, and spray rate, as specified in batch manufacturing record.
5.1.5 Insert the spray guns assembly in to the pan and start automizing air by turning the knob left side then start the peristaltic pump.
5.1.6 Adjust the spray rate as required.
5.1.7 Clean the spray guns intermittently with brush.
5.1.8 After completion of the solution or process dry the tablets for at least 5 to 10 minutes.
5.1.9 Close the operation, affix the unloading assembly.
5.1.10 Unload the tablets in double polylined HDPE containers with labels.
5.1.11 Affix “TO BE CLEANED” label on the equipment.
5.2 Cleaning: [For Product Change]
5.2.1 Dismantle the spray guns, silicon tubes from the gun stand and send it to washing area.
5.2.2 Rotate the pan and wash it with purified water till the residues of the previous product there.
5.2.3 Drain the water from the pan.
5.2.4 Swipe the parts of the pan with a clean dry lint free cloth.
5.2.5 Clean the out side of the machine wet cloth followed by clean dry lint free cloth.
5.2.6 Clean the electric parts of the machine with dry clean cloth.
5.2.7 Wash the gun, assembly and silicon tubes with purified water and dry it with lint free cloth.
5.2.8 Affix a “CLEANED” label on it.
5.2.9 Record the same in logbook.
5.3 Cleaning: [For Batch Change]
5.3.1 Ensure that power supply to the machine is disconnected.
5.3.2 Ensure that there should not be any tablets inside the pan.
5.3.3 Clean the machine with lint free clean lint free cloth.
5.3.4 Affix the “CLEANED” label on it.
5.3.5 Record the activity in log book.
5.4 Cleaning: (At the End of the Shift)
5.4.1 Clean the machine parts with the clean lint free cloth.
6.0 Abbreviations:
| Abbreviation | Expanded Form |
| SOP | Standard Operating Procedure |
| PR | Production |
| QA | Quality Assurance |
| HDPE | High Density Poly Ethylene |
7.0 Forms and Attachments:
Annexure – 1: Equipment Log Book
8.0 Distribution List:
| S. No. | Department Name | No. of Copy |
| 1. | Quality Assurance | 01 |
| 2. | Production | 01 |
9.0 References:
In – House
Annexure – 1
Equipment Usage Log Book
| S. No. | Date | Product Name | B. No. | B. Size | Operation Time | Cleaning
Time |
Done By | Ckd. By | Brk. Down Time | Done By | Remarks | |||
Online Rejection in parenteral
Receipt of Batch from Production to Packing Department
sop for for Spillage Handling in parenteral area
sop for calibration of vessels with dipstick
sop for Cleaning of Bins and Containers
cip of mixing vessel and holding vessel
sop for Cleaning of Ampoule Filling and Sealing Machine
sop for Fogging in Sterile and Non Sterile Area
sop for for Filtration of Bulk Solution
sop for fumigation in production area
sop for post cleaning after media fill
sop for cip of mixing vessel mixing mobile vessel and holding vessel
sop for De-Bagging of Three Piece Vial Dropper Caps
sop for calibration and verification of check weigher
sop for Batch number and Manufacturing and Expiry Date Coding System
standard operating procedure machine history file
sop for operation and cleaning of Hand coder
sop for Cleaning and Handling and Silicone Tubes
sop on operation and cleaning of coating pan
sop for Operation of cleaning of pipe lines
sop for operation of capsule loading machine semi automatic
sop for Machine operation capsule inspection and polishing machine
Sop batch demarcation and batch coding
sop for monitoring of reprocessing of products
sop for in-process control on liquids orals
sop for in process controls on tablets capsules packaging line
sop for Issuance retrieval and destruction of BMR and analytical records
sop for in process controls during granulation compression coating inspection
sop for Cleaning of Blister packing machine
sop for for charge hand over between the shifts
Performance requalification report of visual inspectors
sop for Cleaning and operation of ROPP caps inspection table
sop for usage and destruction of filter pad and cartridge filter
sop for cleaning and storage of transfer pipe
sop for Cleaning and operation of labeling machine
Cleaning and operation of the mono block filling and sealing machine
sop for Cleaning and operation of empty bottle inspection table
sop for Cleaning and operation of filter press
sop for cleaning and operation of liquid transfer pump and line
sop for cleaning and operation of storage vessels
sop for cleaning and operation of sugar syrup manufacturing vessel
sop for cleaning issuance and retrieval of accessories and change parts
sop for Cleaning and operation of visual inspection conveyor belt
sop for Cleaning and operation of spray gun and assemble
sop for Fogging in Aseptic and Non Aseptic Area
