sop for cleaning and operation of liquid transfer pump and line

sop for cleaning and operation of liquid transfer pump and line

1.0 OBJECTIVE
1.1 To describe the cleaning & operation of cleaning & operation of liquid transfer pump and line.
2.0 SCOPE
2.1 This procedure is applicable for liquid transfer pump and line present in the production liquid department.
3.0 RESPONSIBILITY
3.1 Operator – To perform the procedure.
3.2 Officer production- To ensure that the operation is being performed in compliance with the
SOP.



3.3 IPQA person – To ensure in-process checks, and counter check that the
Compliance is in line with SOP.

4.0 ACCOUNTABILITY
4.1 Department Head
5.0 PROCEDURE
5.1 Cleaning: Type A procedure (Batch to Batch Cleaning)
5.1.1 Ensure all the material is removed from the equipment.
5.1.2 Remove the product status label and affix ‘To be cleaned’ status label as per sop over the equipment.
5.1.3 Type A cleaning applicable for batch to batch cleaning of same strength, color, and flavor and continuous five batches.
5.1.4 Type A cleaning applicable for shift end cleaning and continue five batches.
5.1.5 Check and ensure the cleanliness and availability of accessories used for cleaning Nylon brush, Nylon scrubber, Lint free cloth, Gloves.
5.1.6 Take 50 liter potable water in S.S container and connect the transfer pump with line.
5.1.7 Start transfer pump and drain used potable water.



5.1.8 Repeat this process with purified water.
5.2 Cleaning: Type B procedure
5.2.1 Ensure all the material is removed from the equipment.
5.2.2 Remove the product status label and affix ‘To be cleaned’ status label as per sop over the equipment.
5.2.3 Check and ensure the cleanliness and availability of accessories used for cleaning Nylon brush, Nylon scrubber, Lint free cloth, Gloves.
5.2.4 After continue five batches, Type B cleaning should be performed.
5.2.5 Spray potable water on the outer surface of the filter press to remove the adhered material.
5.2.6 Take 50-liter potable water in S.S container and connect the transfer pump with line.
5.2.7 Start transfer pump and drain used potable water.
5.2.8 Repeat this process with 50-liter purified water.
5.2.9 Finally take 50-liter hot purified water (80 to 85oc) and repeat above process.
5.2.10 Inform IPQA to collect rinse/swab sample for QC to analysis.
5.3 OPERATION
5.3.1 Push green button to start the operation.
5.3.2 Push red button to stop the operation.
5.3.3 In case of AODD pump connect with compressed air line to start the operation. And To stop disconnect the compressed air supply.
6.0 TRAINING
6.1 Trainer: Department Head.
6.2 Trainee: Production, Quality Assurance and Operator person.
6.3 Period: one hour or as per required.
7.0 DISTRIBUTION
7.1 One set of Master copy and one set of Controlled copy submit the QA department.
8.0 ENCLOSURES
8.1 NIL
9.0 ABBREVIATIONS
9.1 IPQA : In-process Quality assurance
9.2 BMR : Batch manufacturing record.
9.3 SOP : Standard operating Procedure.
9.4 QC : Quality Control
9.5 AODD PUMP : Air Operated Double Diaphragm Pump
10.0 DOCUMENT CHANGE HISTORY


Revision Reason for revision Effective Date

 

00 NEW SOP      

 

Online Rejection in parenteral

Receipt of Batch from Production to Packing Department

sop for for Spillage Handling in parenteral area

sop for calibration of vessels with dipstick

sop for Cleaning of Bins and Containers

cip of mixing vessel and holding vessel

SOP FOR BATCH MANUFACTURING

sop for placebo batch

sop for Cleaning of Ampoule Filling and Sealing Machine

sop for Fogging in Sterile and Non Sterile Area

sop for for Filtration of Bulk Solution

sop for fumigation in production area

sop for post cleaning after media fill

sop for cip of mixing vessel mixing mobile vessel and holding vessel

sop for De-Bagging of Three Piece Vial Dropper Caps

sop for calibration and verification of check weigher

sop for Batch number and Manufacturing and Expiry Date Coding System

sop for Sanitization of Seals

standard operating procedure machine history file

sop for operation and cleaning of Hand coder

sop for Cleaning and Handling and Silicone Tubes

sop on operation and cleaning of coating pan

sop for Operation of cleaning of pipe lines

Sop for equipment assembly

sop for operation of capsule loading machine semi automatic

sop for Machine operation capsule inspection and polishing machine

Sop for issue of material

Sop batch demarcation and batch coding

sop for material receipts

sop for monitoring of reprocessing of products

sop for in-process control on liquids orals

sop for in process controls on tablets capsules packaging line

sop for Issuance retrieval and destruction of BMR and analytical records

sop for in process controls during granulation compression coating inspection

sop for Cleaning of Blister packing machine

sop for for charge hand over between the shifts

Performance requalification report of visual inspectors

sop for Cleaning and operation of ROPP caps inspection table

sop for usage and destruction of filter pad and cartridge filter

sop for cleaning and storage of transfer pipe

sop for Cleaning and operation of labeling machine

Cleaning and operation of the mono block filling and sealing machine

sop for Cleaning and operation of empty bottle inspection table

sop for Cleaning and operation of filter press

sop for cleaning and operation of liquid transfer pump and line

sop for cleaning and operation of storage vessels

sop for cleaning and operation of sugar syrup manufacturing vessel

sop for cleaning issuance and retrieval of accessories and change parts

sop for Cleaning and operation of visual inspection conveyor belt

sop for Cleaning and operation of spray gun and assemble

sop for Fogging in Aseptic and Non Aseptic Area

 

Leave a Comment

error: Content is protected !!