Cleaning and operation of empty bottle inspection table
1.1 To describe the cleaning & operation of cleaning and operation of empty bottle inspection table.
2.1 This procedure is applicable for empty bottle inspection table present in the production Liquid department.
3.1 Operator – To perform the procedure.
3.2 Officer production- To ensure that the operation is being performed in compliance with the
3.3 IPQA person – To ensure in-process checks, and counter check that the
Compliance is in line with SOP.
4.1 Department Head
5.1.1 Switch “OFF” mains power supply
5.1.2 Ensure remove all empty bottle from inspection table.
5.1.3 Clean the inspection table with dry clean lint frees cloth to remove adhering material.
5.1.4 Wipe with dry lint free cloth. & allow it for air dry.
5.1.5 Finally clean with moping of lint free cloth dipped in70% IPA solution and allow it for air dry.
5.1.6 Affix status label “CLEANED” as per sop
5.1.7 In case the inspection table is not used for 72 hours, clean it again before use.
5.3.1 Push green button to start the operation.
5.3.2 Push red button to stop the operation.
5.3.3 All activity to be recorded as per SOP
6.1 Trainer: Department Head.
6.2 Trainee: Production, Quality Assurance and Operator person.
6.3 Period: one hour or as per required.
7.1 One set of Master copy and one set of Controlled copy submit the QA department.
9.1 IPA : Iso Propyl alcohol
9.2 % : Percentage
9.3 SOP : Standard operating Procedure.
9.4 QC : Quality Control
10.0 DOCUMENT CHANGE HISTORY
|Revision||Reason for revision||Effective Date