sop for checking punch height
A. FOR NEW PUNCH SETS
1. Take the punch box in spare parts room.
2. Clean the punches as per SOP.
3. Assemble the punch height checking equipment.
4. Clean the platform of punch height checking equipment.
5. Place the standard punch (supplied along with equipment) on platform and adjust it below the
dial knob.
6. Set dial indicator to zero by rotating the dial of equipment.
7. Recheck the zero setting of dial indicator with standard punch and check the height of punches
by placing it in the guide and on to the platform.
8. Record the readings of dial indicator (Unit Inch) on format.
9. Similarly check and record the height of all upper and lower punches on the format.
10. Discard punch if the deviation more than 0.003 inch in case of round shaped and 0.005
inch for of capsule shaped than the standard height.
11. Hand over the format to the department head after duly checked and signed by engineering
department.
12. Clean the platform and dismantle the equipment.
13. Keep the equipment parts, dial and standard punch in the wooden box.
14. Apply oil on the punch tip before replacing them back into their respective drawers.
B FOR USED PUNCH SETS
a. For round shaped punches, check the height when one set compresses 10 million tablets.
b. For special shaped punches, check the height when one set compresses 5 million tablets.
C For checking the height follow step 3 to 13.
Online Rejection in parenteral
Receipt of Batch from Production to Packing Department
sop for for Spillage Handling in parenteral area
sop for calibration of vessels with dipstick
sop for Cleaning of Bins and Containers
cip of mixing vessel and holding vessel
sop for Cleaning of Ampoule Filling and Sealing Machine
sop for Fogging in Sterile and Non Sterile Area
sop for for Filtration of Bulk Solution
sop for fumigation in production area
sop for post cleaning after media fill
sop for cip of mixing vessel mixing mobile vessel and holding vessel
sop for De-Bagging of Three Piece Vial Dropper Caps
sop for calibration and verification of check weigher
sop for Batch number and Manufacturing and Expiry Date Coding System
standard operating procedure machine history file
sop for operation and cleaning of Hand coder
sop for Cleaning and Handling and Silicone Tubes
sop on operation and cleaning of coating pan
sop for Operation of cleaning of pipe lines
sop for operation of capsule loading machine semi automatic
sop for Machine operation capsule inspection and polishing machine
Sop batch demarcation and batch coding
sop for monitoring of reprocessing of products
sop for in-process control on liquids orals
sop for in process controls on tablets capsules packaging line
sop for Issuance retrieval and destruction of BMR and analytical records
sop for in process controls during granulation compression coating inspection
sop for Cleaning of Blister packing machine
sop for for charge hand over between the shifts
Performance requalification report of visual inspectors
sop for Cleaning and operation of ROPP caps inspection table
sop for usage and destruction of filter pad and cartridge filter
sop for cleaning and storage of transfer pipe
sop for Cleaning and operation of labeling machine
Cleaning and operation of the mono block filling and sealing machine
sop for Cleaning and operation of empty bottle inspection table
sop for Cleaning and operation of filter press
sop for cleaning and operation of liquid transfer pump and line
sop for cleaning and operation of storage vessels
sop for cleaning and operation of sugar syrup manufacturing vessel
sop for cleaning issuance and retrieval of accessories and change parts
sop for Cleaning and operation of visual inspection conveyor belt
