sop for fumigation in production area
1.0 OBJECTIVE:
To lay down a Procedure for Fumigation in Production Area.
2.0 SCOPE:
This SOP is applicable for Fumigation in Production Area
3.0 RESPONSIBILITY:
Officer / Executive – Production
4.0 ACCOUNTABILITY:
Head – Production
5.0 PROCEDURE:
5.1 Fumigation should be carried out at the end of the production operation twice in a month and whenever required.
5.2 Production person shall ensure that raw material, finished goods, intermediates or in process goods should not be present in the area of fumigation.
5.3 Always use nose-mask and goggles while doing fumigation as silvicide is irritating to the human eyes.
5.4 Window, doors should be closed, AHU should be switched off before starting fumigation.
5.5 Place 20% silvicide in the fogger and switch “ON” the fogger.
5.6 After fumigation of the area is complete, switch “OFF” the fogger and affixed the label as “Area under fumigation do not enter” on every side of the entrance. Allow the fumigation fumes to stay for about 6-7 hours.
5.7 After the specified time of fumigation is over, enter the area only starting exhaust for about 30 minute.
5.8 Conduct cleaning before processing any product in the concerned area.
5.9 After 30 minutes, start the AHU’s allow to stabilize to attend required temperature and humidity then start the routine production operation.
6.0 ABBREVIATION:
SOP Standard Operating Procedure
Ltd. Limited
No. Number
QA Quality Assurance
BMR Batch Manufacturing Record
RM Raw Material
PM Packing Material
PD Production Department
AHU Air Handling Unit
7.0 ANNEXURES:
Not Applicable
8.0 DISTRIBUTION:
Controlled Copy No.1 Production Department
Master Copy Quality Assurance
9.0 REFRENCE:
Not Applicable
10.0 REVISION HISTORY:
| Revision No. | Change Control No. | Details of Changes | Reason of Changes | Effective Date | Done By |
| 00 | Not Applicable | Not Applicable | New SOP |
Online Rejection in parenteral
Receipt of Batch from Production to Packing Department
sop for for Spillage Handling in parenteral area
sop for calibration of vessels with dipstick
sop for Cleaning of Bins and Containers
cip of mixing vessel and holding vessel
sop for Cleaning of Ampoule Filling and Sealing Machine
sop for Fogging in Sterile and Non Sterile Area
sop for for Filtration of Bulk Solution
sop for fumigation in production area
sop for post cleaning after media fill
sop for cip of mixing vessel mixing mobile vessel and holding vessel
sop for De-Bagging of Three Piece Vial Dropper Caps
sop for calibration and verification of check weigher
sop for Batch number and Manufacturing and Expiry Date Coding System
standard operating procedure machine history file
sop for operation and cleaning of Hand coder
sop for Cleaning and Handling and Silicone Tubes
sop on operation and cleaning of coating pan
sop for Operation of cleaning of pipe lines
sop for operation of capsule loading machine semi automatic
sop for Machine operation capsule inspection and polishing machine
Sop batch demarcation and batch coding
sop for monitoring of reprocessing of products
sop for in-process control on liquids orals
sop for in process controls on tablets capsules packaging line
sop for Issuance retrieval and destruction of BMR and analytical records
sop for in process controls during granulation compression coating inspection
sop for Cleaning of Blister packing machine
sop for for charge hand over between the shifts
Performance requalification report of visual inspectors
sop for Cleaning and operation of ROPP caps inspection table
sop for usage and destruction of filter pad and cartridge filter
sop for cleaning and storage of transfer pipe
sop for Cleaning and operation of labeling machine
Cleaning and operation of the mono block filling and sealing machine
sop for Cleaning and operation of empty bottle inspection table
sop for Cleaning and operation of filter press
sop for cleaning and operation of liquid transfer pump and line
sop for cleaning and operation of storage vessels
sop for cleaning and operation of sugar syrup manufacturing vessel
sop for cleaning issuance and retrieval of accessories and change parts
sop for Cleaning and operation of visual inspection conveyor belt
sop for Cleaning and operation of spray gun and assemble
sop for Fogging in Aseptic and Non Aseptic Area