Entry and Exit in Microbiology Limit testing area
1.0 Objective
To lay down a procedure for entry and exit in microbiology limit testing area.
2.0 Scope
This Standard Operating Procedure is applicable for the procedure for entry and exit in microbiology limit testing area to be followed at Quality Control Department of abc Compay.
3.0 Responsibility
3.1 Concerned Officer/Executive shall be responsible to follow this SOP.
3.2 Department Head or his designee shall be responsible to implement and ensuring to compliance of this SOP.
4.0 Abbreviations and Definitions
SOP : Standard Operating Procedure
Q.C : Quality Control
IPA : Iso Propyl Alcohol
No. : Number
MLT : Microbiology Limit Test
5.0 Procedure
5.1 Entry
5.1.1 MLT area has got a change room outside.
5.1.2 Only authorized Officers/Executive and listed staff is allowed to enter into the MLT area.
5.1.3 Every entry shall be written in the log book as given in the Annexure-1.
5.1.4 Enter in the change room.
5.1.5 Remove the primary gowning including sleepers and keep in the shelf provided in the
crossover bench in the change room.
5.1.6 Now sit and swing over the cross bench.
5.1.7 Sanitize the hands with the disinfectant (70% IPA).
5.1.8 Wear clean primary gowning including sleepers, Headgear, nose mask and hand gloves.
5.1.9 Enter in to the MLT area.
5.2 Exit
5.2.1 After completion of work, remove hand gloves and put them into disposal bin.
5.2.2 Enter in the change room.
5.2.3 Remove Working gowning, Headgear and nose mask in the disposal bin kept in the change room.
5.2.4 Cross the crossover bench.
5.2.5 Wear primary gowning including sleepers kept in the shelf provided in the crossover bench
and exit from the change room.
5.2.6 Records the entry and exit time and purpose in Annexure-1.
5.3 Personnel hygiene and General precautions
5.3.1 Staff in the Microbiology Department / who are authorized to enter in the Microbiology
Limit Testing area should not have extra grown nails beard and long hair.
5.3.2 Staff in the Microbiology Department / who are authorized to enter in the Microbiology
Limit Testing area should free from cough, cold, skin allergy, wounds and other contagious diseases.
5.3.3 Staff in the Microbiology Department / who are authorized to enter in the Microbiology
Limit Testing area should not have ornaments like ring, wrist watch, braslate etc.
5.3.4 Every personal entry into the microbiology limit testing area should be authorized by the
Microbiology department head or his designee after verifying all aspects. Record the same in Annexure-1.
5.3.5 Ensure that both the doors of change room are not open at a time.
5.3.6 Use new sterile gown every time.
6.0 Forms and Records
6.1 Log of Entry and Exit in Microbiology Limit Testing area – Annexure-1
7.0 Distribution
7.1 Master copy – Documentation Cell (Quality Assurance)
7.2 Control copy – Quality Control
8.0 History
Revision Number | Details For Change |
Reason for Revision |
00 | New SOP | NA |
sop for calibration and validation of micro autoclave
sop for Sterility failure investigation
cleaning and operation of discard autoclave
sop for operation of fogger machine
sop for Biological assay of lactic acid bacillus
sop for preparation of culture inoculum
STP for sterility testing of sterile gloves
sop for Operation and calibration of active air sampler
sop for transfer of material for testing and sampling in sterile area
entry & exit procedure in microbiology laboratory
Growth Promotion Test In Microbiology Laboratory
Operation of B.O.D in Microbiology Laboratory
Operation of Horizontal Laminar Air Flow in the microbiology laboratory
Operation and cleaning of Pass Box.
Operation and cleaning of air sampler
Cleaning and Sterilization of Glassware
Analysis of water for microbial load in microbiology lab
Operation and temperature monitoring of Refrigerator
Fumigation of Microbiology Laboratory.
Entry & Exit procedure In Sterility Area
SOP for Microbial analysis of Raw Material Finished Products
SOP for Operation & Calibration of pH meter in Micro Department
SOP for Operation & Calibration of pH meter in Micro Department
SOP Operation and calibration of Hot Air Oven In Microbiology
SOP for operation cleaning & calibration of Digital colony counter
SOP for Operation And Cleaning of Microscope
sop for Media Preparation and Consumption
sop for Receipt Storage and Usage of Culture Media
sop for Cleaning Sanitization And Disinfection In Microbiology
sop for Environmental monitoring of all the Classified area
sop for Handling and Sub culturing of Microbial cultures
sop for Media Growth Promotion Test and various Microbiological test
sop for BOD incubator operation and cleaning
sop sampling of water for microbiological analysis
sop for Disinfectant Efficacy Test
sop for for cleaning and operation of vortex mixture
sop for Temperature & Relative Humidity Monitoring
sop for Operation and Calibration of Heating Block
sop for Sterility Testing of Microbiology
sop for Disposal of Culture Media
sop for Drain point of Microbiology
sop for entry & exit procedure In Microbial limit test and Biosafety
sop for Gram Staining of Bacteria in Microbiology Laboratory
sop for Monitoring of Compressed Air/gases for microbiological analysis
sop for BET (Bacterial Endotoxin) test in Microbiology
sop for receipt storage and Determining the population of Biological indicators
sop for qualification of analyst microbiologist
sop for Bioburden test of Packing materials in Microbiology Laboratory
sop for microbiological assay of erythromycin antibiotic
sop for liquid particle counter
sop for operation and calibration of digital zone reader
sop for monitoring of ultraviolet efficiency LAF and pass box
microbiological assay of cyanocobalamin or vitamin B12
gowning procedure for microbiological testing area
swab testing of various surfaces for bioburden determination
sop for endotoxin challenge test
Hold time study protocol for sterilized media
sop for personnel Qualification protocol for aseptic area
sop for sampling and testing of drain water
Sop for Operation of Airborne Particle Counter
sop for Validation protocol of steam sterilizer autoclave
sop for pathogen detection from drain point
Sop for Analysis of Raw water Purified water water for injection and pure steam water
sop for preservatives efficacy test
sop for collection and preservation of in house isolated microorganisms
sop for Operation Calibration and Maintenance of Micropipette
sop for microbiological testing of water
sop for depyrogenation of apparatus
sop for fertility test growth promotion test of media
sop for Operation and cleaning of moist heat sterilizer
sop for monitoring by active air sampler
sop for swab sampling and testing for clean rooms in production area
sop for monitoring in microbiology laboratory
sop for Fumigation of aseptic area and microbiology lab
sop for monitoring of personnel in aseptic area
sop for maintenance of cultures
sop for Operation and cleaning of laminar bench
sop for monitoring of pure steam
sop for entry and exit procedure to m.l.t and b.e.t room
sop for storage of and use of media
sop for disposal of microbiological media and cleaning of microbiological glassware
Preparation Filtration Usage and Destruction of Disinfectant Solution
Entry Exit and gowning Procedure in Microbiology Laboratory
Safety measures to be followed in microbiology laboratory
Growth Promotion Test of Media
Preservation and Maintenance of Microbial Strain