1.1 To describe a procedure for the fumigation in Production area and Quality Control Microbiology .
2.1 This procedure applicable for fumigation in production area and Quality Control Microbiology Department
3.1 Officer Microbiologist
3.2 Executive Microbiologist

4.1 Head –QC

5.1 Requirement

5.1.1 Fumigation machine (Fogger Machine)

5.1.2 20%v/v Silvicide Solution
5.2 Fumigation Procedure –

5.2.1 At the end of the week i.e. on Saturday evening when all activity stops at micro and liquid section then fumigation is done and for other areas fumigation is twice in a month.

5.2.2 Put off AHU and remove the product under processing from the area. Seal the container having product properly.

5.2.3 Keep the fogger on till it forms sufficient fog in the area and then shift to another area

5.2.4 After completion of fumigation keep the area closed for not less than 6-8 hrs .

5.2.5 After completion of fumigation activity and before start of the next activity, carry out the cleaning of the equipment properly.

5.2.6 The Prepared silvicide solution is valid up to for 3 days and cleans the fogger machine with purified water and dry a clean lint free wipe.

5.2.7 Maintain the Fumigation Record

5.3 Frequency:

5.3.1 Weekly in Microbiology and Liquid Section and Twice in a month in Production area and whenever required.

5.4 Precautions:-

5.4.1 Use proper safety apparel such as gowns, hand gloves, mask and safety goggles during fumigation.

5.4.2 Inform production department to make the area available for fumigation. Before fumigation display the board as

Area Under Fumigation. Mention date and time on the display board.

5.4.2 Make sure the area to be fumigated cleaned thoroughly.

5.4.3 AHU should be put OFF 10 minutes before the fumigation starts
5.4.4 Cover the electronic equipments with plastic sheet.


6.1 Trainer- Head of Quality Control.
6.2 Trainee- Microbiologist Person.
6.3 Period- One hour or as per required.
7.1 One set of Master copy & control copy submit the QA department.
8.0 ENCLOSURES     Fumigation Record

9.1 QC : Quality Control
9.2 QCM. : Quality Control Microbiology

9.3 SOP : Standard Operating Procedure
9.4 QAD : Quality Assurance Department


Revision Reason for Revision Effective Date



Date Qty. Of Silvicide Used Qty. Of Purified Water                    Used Fogging Started Total Time Done By Checked By
From To






sop for calibration and validation of micro autoclave

sop for Sterility failure investigation

cleaning and operation of discard autoclave

sop for operation of fogger machine

sop for Biological assay of lactic acid bacillus

sop for preparation of culture inoculum

STP for sterility testing of sterile gloves

sop for Operation and calibration of active air sampler

sop for transfer of material for testing and sampling in sterile area

entry & exit procedure in microbiology laboratory

Growth Promotion Test In Microbiology Laboratory

Operation of B.O.D in Microbiology Laboratory

Operation of Horizontal Laminar Air Flow in the microbiology laboratory

Operation and cleaning of Pass Box.

Operation and cleaning of air sampler

Cleaning and Sterilization of Glassware

Analysis of water for microbial load in microbiology lab

Operation and temperature monitoring of Refrigerator

Fumigation of Microbiology Laboratory.

Entry & Exit procedure In Sterility Area

SOP for Microbial analysis of Raw Material Finished Products

SOP for Operation & Calibration of pH meter in Micro Department

SOP for Operation & Calibration of pH meter in Micro Department

SOP Operation and calibration of Hot Air Oven In Microbiology

SOP for operation cleaning & calibration of Digital colony counter

SOP for Operation And Cleaning of Microscope

sop for Media Preparation and Consumption

sop for Receipt Storage and Usage of Culture Media

sop for Cleaning Sanitization And Disinfection In Microbiology

sop for Environmental monitoring of all the Classified area

sop for Handling and Sub culturing of Microbial cultures

sop for Media Growth Promotion Test and various Microbiological test

sop for BOD incubator operation and cleaning

sop sampling of water for microbiological analysis

sop for Disinfectant Efficacy Test

sop for for cleaning and operation of vortex mixture

sop for Temperature & Relative Humidity Monitoring

sop for Operation and Calibration of Heating Block

sop for Sterility Testing of Microbiology

sop for Disposal of Culture Media

sop for Drain point of Microbiology

sop for entry & exit procedure In Microbial limit test and Biosafety

sop for Gram Staining of Bacteria in Microbiology Laboratory

sop for Monitoring of Compressed Air/gases for microbiological analysis

sop for BET (Bacterial Endotoxin) test in Microbiology

sop for receipt storage and Determining the population of Biological indicators

sop for qualification of analyst microbiologist

sop for Bioburden test of Packing materials in Microbiology Laboratory

sop for microbiological assay of erythromycin antibiotic

sop for liquid particle counter

sop for operation and calibration of digital zone reader

sop for monitoring of ultraviolet efficiency LAF and pass box

microbiological assay of cyanocobalamin or vitamin B12

gowning procedure for microbiological testing area

swab testing of various surfaces for bioburden determination

sop for endotoxin challenge test

Hold time study protocol for sterilized media

sop for personnel Qualification protocol for aseptic area

sop for sampling and testing of drain water

Sop for Operation of Airborne Particle Counter

sop for Inoculum Preparation

sop for Validation protocol of steam sterilizer autoclave

sop for pathogen detection from drain point

Sop for Analysis of Raw water Purified water water for injection and pure steam water

sop for preservatives efficacy test

sop for collection and preservation of in house isolated microorganisms

sop for Operation Calibration and Maintenance of Micropipette

Sop for UV Efficacy Test

sop for gram staining

Sop for swab testing

sop for microbiological testing of water


sop for depyrogenation of apparatus

sop for media preparation

sop for fertility test growth promotion test of media

sop for Operation and cleaning of moist heat sterilizer

sop for monitoring by active air sampler

sop for swab sampling and testing for clean rooms in production area

sop for monitoring in microbiology laboratory

sop for Fumigation of aseptic area and microbiology lab

sop for monitoring of personnel in aseptic area

sop for maintenance of cultures

sop for Operation and cleaning of laminar bench

preparation of settle plates

sop for monitoring of pure steam

sop for entry and exit procedure to m.l.t and b.e.t room

sop for storage of and use of media

sop for disposal of microbiological media and cleaning of microbiological glassware


Leave a Comment

error: Content is protected !!