sop for Checking light intensity
To lay down a procedure for Checking Light Intensity.
This Standard Operating Procedure is applicable for Checking Light Intensity to be followed at formulation plants
3.1 Officer / Executive Engineering shall be responsible for the execution of this procedure.
3.2 Engineering Manager shall be responsible for the implementation of this SOP.
3.3 Head QA/designee shall be responsible for the compliance of this SOP.
4.0 Abbreviations and Definitions
SOP : Standard Operating Procedure
No : Number
QA : Quality assurance
ER : Engineering
5.1 General Conditions
5.1.1 Put on the light of Respective Area.
5.1.2 Set the limit of Lux which shall be measure in luxmeter.
5.1.3 Put the power switch of luxmeter in on mode.
5.1.4 Place the sensor of lux meter at working height.
5.1.5 Record the values & multiply by its multiplying factor.
5.2.1 Use necessary safety wears, while doing the work.
5.2.2 Ensure there is no obstruction on lux meter sensor.
6.0 Forms and Records
6.1 Yearly Preventive Maintenance Check List of – Annexure-1
7.1 Master copy – Documentation Cell (Quality Assurance)
7.2 Controlled copies – Engineering Department