sop for Methodology to Dispose ETP Sludge
To lay down a procedure for Methodology to Dispose ETP Sludge.
This Standard Operating Procedure is applicable for the Cleaning of ETP Sludge Disposal to be followed at formulation plants
3.1 Officer / Executive Engineering shall be responsible for the execution of this procedure.
3.2 Engineering Manager shall be responsible for the implementation of this SOP.
3.3 Head QA/designee shall be responsible for the compliance of this SOP.
4.0 Abbreviations and Definitions
SOP : Standard Operating Procedure etc
No : Number
QA : Quality Assurance
NA : Not Applicable
Sr. No : Serial Number
Hrs : Hours
ER : Engineering
UEPPCB : Uttarakhand Environment Protection and Pollution control board
ETP : Effluent Treatment Plant
5.1 General conditions:
5.1.1 Use necessary safety wears like Hand gloves, Gum boot and goggles.
5.2.1 Allow the Chemical Sludge to dry in chemical sludge drying bed and bio sludge to dry in bio sludge drying bed.
5.2.2 Collects to dry bio sludge in a HDPE bags and use as manure in Garden.
5.2.3 Collects to dry Chemical Sludge in a HDPE bags and store in Storage room.
5.2.4 All sludge should be disposed as per norms and guidelines of UEPPCB.
5.3.1 After formation and drying of sludge.
6.1 Master copy – Documentation Cell (Quality Assurance)
6.2 Controlled copies – Engineering Department