sop for Operation of Lift
To lay down a procedure for Operation of Lift.
This Standard Operating Procedure is applicable for Operation of Lifts to be followed at formulation plants
3.1 Engineering Officer / Executive shall be responsible for the execution of this procedure.
3.2 Engineering Manager shall be responsible for the implementation of this SOP.
3.3 Head QA/designee shall be responsible for compliance of this SOP.
4.0 Abbreviations and Definitions
SOP : Standard Operating Procedure
No : Number
QA : Quality Assurance
Sr. No : Serial number
ER : Engineering
Following activities are to be carried out to start the Lift
5.1 For material transport, ensure that the lift is at the required floor. If not then, Press the push button near the power panel for arriving of lift at our required floor.
5.2 When lift stops completely, the door will open automatically.
5.3 Now pallet trolley can be used for material movement.
5.4 Transfer the material into the lift.
5.5 Closed the doors properly by pressing the push button.
5.6 Push the floor selector push button considering at which floor (first or ground) the material is to be transported.
5.7 Ensure that the lift stops completely.
5.8 Open the doors and then move the material outside the lift
6.0 Forms and Records
7.1 Master copy – Documentation Cell (Quality Assurance)
7.2 Controlled copies – Engineering Department